Professional Window Tinting in Pemberville, Ohio
Enhanced privacy and comfort with a lifetime warranty.
The Top Reasons to Get Your Windows Tinted by Neat Freak
Rejecting up to 98% of infrared heat
Block 99%+ of harmful UVA and UVB rays
Glare is reduced allowing for a safer drive
Increases privacy and overall vehicle appearance
Precision-cut, and clean-room installed
All of our films carry a nationwide lifetime warranty
Three Options for Performance Window Tint
Carbon
50-70% IR Rejection
-
$50 per door
$20+ per quarter/side windows
$100 rear window
$180 Windshield
$60 Sunroof
$300 for typical 4-door vehicle, sides and rear
-
Superior alternative to cheaper dyed tint, with moderate heat blocking.
UV Rejection >99%
IR Rejection 50-74%
1.5mil thickness / 2-ply
Carbon particles that will never fade or change color
Lifetime warranty against cracking, peeling, delamination, adhesive failure, and color fade.
Ceramic
83-88% IR Rejection
-
$60 per door
$25+ per quarter/side windows
$120 rear window
$200 Windshield
$80 Sunroof
$360 for typical 4-door vehicle, sides and rear
-
Optimal Heat Insulation
UV Rejection >99%
IR Rejection 83-88%
1.5mil thickness / 2-ply
Single non-conductive ceramic layer
Carbon particles that will never fade or change color
Lifetime warranty against cracking, peeling, delamination, adhesive failure, and color fade.
Premium Ceramic
94-98% IR Rejection
-
$70 per door
$30+ per quarter/side windows
$140 rear window
$220 Windshield
$100 Sunroof
$420 for typical 4-door vehicle, sides and rear
-
Maximum Heat Insulation
UV Rejection >99%
IR Rejection 94-98%
1.5mil thickness / 2-ply
Multiple non-conductive ceramic layers
Carbon particles that will never fade or change color
Lifetime warranty against cracking, peeling, delamination, adhesive failure, and color fade.
Our Approach to Window Tinting
Our goal is to make sure you are satisfied with your long-term upgrade.
At Neat Freak, we only offer premium films that are guaranteed to look and feel great for the lifetime of the vehicle. Our installation process is meticulous and thorough, designed to prevent defects and panel damage often seen with less professional services.
We use a precision-cut machine to minimize manual cutting on the vehicle. Hand-cutting patterns can damage rubber seals and door trim. For windshields that require a hand-cut pattern, we use special tape to prevent cutting through to the glass.
After our installation, we double back and inspect all windows to ensure proper film adhesion and address any issues. Installation time can vary depending on your vehicle's size, potentially requiring a full day. Adding other detailing services will also increase the time. We'll discuss the estimated timeline with you before we start.
Window Tint Removal
If you need to remove window tint for any reason, we can help. Professional removal is recommended to avoid damaging the glass, seals, and defroster lines.
We utilize steam to remove the film and a special adhesive remover to completely strip the glass. We have experience removing trim panels, which allows us to get the best end result.
Pricing for this service will depend on several factors, please contact us and we can work on a customized quote for your situation.